Advanced Characterization and On-Line Process Monitoring of Additively Manufactured Materials and Components

doi:10.3390/books978-3-0365-5814-1

Download Url(s)

https://mdpi.com/books/pdfview/book/6684

Contributor(s)

Bruno, Giovanni (editor)

Maierhofer, Christiane (editor)

Language

English

Show full item record

Abstract

This reprint is concerned with the microstructural characterization and the defect analysis of metallic additively manufactured (AM) materials and parts. Special attention is paid to the determination of residual stress in such parts and to online monitoring techniques devised to predict the appearance of defects. Finally, several non-destructive testing techniques are employed to assess the quality of AM materials and parts.

URI

https://directory.doabooks.org/handle/20.500.12854/96738

Keywords

residual stress; synchrotron X-ray diffraction; additive manufacturing; Ti-6Al-4V; laser powder bed fusion (L-PBF); selective laser melting (SLM); additive manufacturing (AM); process monitoring; infrared thermography; optical tomography; computed tomography (CT); data fusion; lack-of-fusion; direct metal laser sintering; Ti6Al4V (ELI); dynamic properties; Split Hopkinson Pressure Bar; flow stress; fracture strain; WAAM; neutron diffraction; hybrid manufacturing; Laser Powder Bed Fusion; LPBF; AISI 316L; online process monitoring; thermography; X-ray diffraction; computed tomography; laser melting deposition; 3D printing; X-ray computed tomography; porosity; non-destructive analysis; laser beam melting (LBM); emissivity; calibration; thermocouples; 316L; IN718; feedstock powder; radiography; digital detector array; numerical simulation; detectability; X-ray computed tomography (XCT); healing; in situ monitoring; laser powder bed fusion; selective laser melting; laser beam melting; in-situ process monitoring; heat accumulation; inter layer time; cellular substructure; powder bed fusion (PBF); eddy current testing (ECT); part quality; in situ relative part density measurement; quality management; laser-based additive manufacturing; residual stress analysis; X-ray and neutron diffraction; diffraction-elastic constants; strain-free lattice spacing; subsurface defects; laser ultrasound; stainless steel; X-ray micro computed tomography (XCT); defect detection; image registration; n/a