Show simple item record

Herstellung dünner Folien aus Lithium-Lanthan-Titanat zur Anwendung als Festkörperelektrolyt

dc.contributor.authorSchröckert, Felix
dc.date.accessioned2022-04-05T04:01:43Z
dc.date.available2022-04-05T04:01:43Z
dc.date.issued2022
dc.date.submitted2022-04-04T14:53:13Z
dc.identifierONIX_20220404_9783731510086_4
dc.identifier2192-9963
dc.identifierhttps://library.oapen.org/handle/20.500.12657/53692
dc.identifier.urihttps://directory.doabooks.org/handle/20.500.12854/80563
dc.description.abstractIn this work the production of a thin film of lithium lanthanum titanate by tape casting for use in a lithium ion solid state battery is described. The influence of the composition of the slip on its flow properties is investigated. The layers produced are characterized both individually and in connection with a composite anode made of lithium titanate. Their suitability for use in a solid-state battery is demonstrated.
dc.languageGerman
dc.relation.ispartofseriesSchriftenreihe des Instituts für Angewandte Materialien, Karlsruher Institut für Technologie
dc.rightsopen access
dc.subject.classificationbic Book Industry Communication::T Technology, engineering, agriculture::TG Mechanical engineering & materials
dc.subject.otherKeramik
dc.subject.otherFoliengießen
dc.subject.otherFestkörperelektrolyt
dc.subject.otherLithium-Ionen-Batterie
dc.subject.otherLithium-Lanthan-Titanat
dc.subject.otherceramics
dc.subject.othertape casting
dc.subject.othersolid electrolyte
dc.subject.otherlithium ion battery
dc.subject.otherlithium lanthanum titanate
dc.titleHerstellung dünner Folien aus Lithium-Lanthan-Titanat zur Anwendung als Festkörperelektrolyt
dc.typebook
oapen.identifier.doi10.5445/KSP/1000105152
oapen.relation.isPublishedBy68fffc18-8f7b-44fa-ac7e-0b7d7d979bd2
oapen.relation.isbn9783731510086
oapen.imprintKIT Scientific Publishing
oapen.pages176
oapen.place.publicationKarlsruhe
dc.seriesnumber95
dc.abstractotherlanguageIn this work the production of a thin film of lithium lanthanum titanate by tape casting for use in a lithium ion solid state battery is described. The influence of the composition of the slip on its flow properties is investigated. The layers produced are characterized both individually and in connection with a composite anode made of lithium titanate. Their suitability for use in a solid-state battery is demonstrated.


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record

open access
Except where otherwise noted, this item's license is described as open access