TY  - BOOK
AU  - Bleck, Wolfgang
AU  - Haase, Christian
AB  - The Special Issue ‘Physical Metallurgy of High Manganese Steels’ addresses the highly fascinating class of manganese-alloyed steels with manganese contents well above 3 mass%. The book gathers manuscripts from internationally recognized researchers with stimulating new ideas and original results. It consists of fifteen original research papers. Seven contributions focus on steels with manganese contents above 12 mass%. These contributions cover fundamental aspects of process-microstrcuture-properties relationships with processes ranging from cold and warm rolling over deep rolling to heat treatment. Novel findings regarding the fatigue and fracture behavior, deformation mechanisms, and computer-aided design are presented. Additionally, the Special Issue also reflects the current trend of reduced Mn content (3-12 mass%) in advanced high strength steels (AHSS). Eight contributions were dedicated to these alloys, which are often referred to as 3rd generation AHSS, medium manganese steels or quenching and partitioning (Q&P/Q+P) steels. The interplay between advanced processing, mainly novel annealing variants, and microstructure evolution has been addressed using computational and experimental approaches. A deeper understanding of strain-rate sensitivity, hydrogen embrittlement, phase transformations, and the consequences for the materials’ properties has been developed. Hence, the topics included are manifold, fundamental-science oriented and, at the same time, relevant to industrial application.
DO  - 10.3390/books978-3-03921-857-8
ID  - OAPEN ID: 43214
KW  - n/a
KW  - TRIP
KW  - microstructure
KW  - medium-manganese steel
KW  - dislocation density
KW  - V alloying
KW  - ultrafine grains
KW  - intercritical annealing
KW  - medium manganese steel
KW  - fracture
KW  - precipitations
KW  - twinning induced plasticity
KW  - deformation behavior
KW  - fatigue
KW  - austenite-reversed-transformation
KW  - medium-manganese
KW  - Lüders band
KW  - medium-Mn steel
KW  - fatigue behavior
KW  - alloy design
KW  - austenitic high nitrogen steel (HNS)
KW  - high-entropy alloys
KW  - mechanical properties
KW  - retained austenite
KW  - high-manganese steel
KW  - localized deformation
KW  - phase transformation
KW  - austenite stability
KW  - processing
KW  - strain-hardening behavior
KW  - TWIP steel
KW  - recrystallization annealing
KW  - damage
KW  - strengthening
KW  - cold rolling
KW  - ultrafine-grained microstructure
KW  - serrated flow
KW  - multiscale simulation
KW  - deformation twinning
KW  - annealing
KW  - high-Mn steels
KW  - corrosion resistance
KW  - TWIP
KW  - quenching and partitioning
KW  - high manganese steel
KW  - lightweight
KW  - residual stresses
KW  - in-situ DIC tensile tests
KW  - crash box
KW  - deep rolling
KW  - high strength steel
KW  - plastic deformation
KW  - MMn steel X20CrNiMnVN18-5-10
KW  - neutron diffraction
KW  - phase field simulation
KW  - dynamic strain aging
KW  - cold deformation
KW  - near surface properties
KW  - P steel
KW  - continuous annealing
KW  - texture
KW  - hydrogen embrittlement
KW  - hot-stamping
KW  - warm rolling
KW  - strain-rate sensitivity
KW  - austenite reversion
KW  - D&amp
KW  - forging
KW  - high-manganese steels
KW  - grain refinement
KW  - double soaking
L1  - https://mdpi.com/books/pdfview/book/1879
LA  - English
LK  - https://directory.doabooks.org/handle/20.500.12854/56219
PB  - MDPI - Multidisciplinary Digital Publishing Institute
PY  - 2019
SN  - 9783039218561
SN  - 9783039218578
TI  - Physical Metallurgy of High Manganese Steelsnull
ER  - 
